Alright! Here's the projects that I've done, but first, here's my flocking how-to.
Everything was painted with a base color that matched the flocking to make the colors supersaturated. The flocking is at least two layers thick, because it just looks better. You'll want to do everything that you need to do with your project so that the flocking is the very nearly the last step - I'll get into that below.
I do everything in small areas, brushing on about a 1"x1" area of glue and pressing the flocking into place before moving on to the next area. I try to leave the outer edges of each "glue patch" open and blend it into the next patch (as though the patches overlap) so that I don't end up with an obvious, patchy grid when everything is done, but it'll happen in spots anyway. Don't worry about it, you can fix it in the next layer. I don't shake off the excess flocking until everything has dried over night, then I shake/brush it off and recycle it for the next layer.
I've found that working over a plastic container with low sides works well. Rather than sprinkling the flocking over it all, I dump about a tablespoon of flocking in the container (I use a plastic on from a local grocery store's salad bar), and just pick it up and press everything where it's supposed to be, although I'm sure that if you had a small enough piece you could just coat the whole thing with your glue and drop it into the bag of flocking and coat it Shake N Bake style.
You can shake/brush/tap the excess flocking off and recycle it for another project or another layer once everything is dry. It's important to not shake the excess off until it's dry so that you don't lose any flocking that may have otherwise stuck; you'll have less touching up to do with the next layer. My second layer is usually devoted to trying to make everything looking consistently thick across everything. Pay attention to areas with corners/angles, such as where the bottom of the hoof meets the bottom edge of the leg, or the edges of rear legs where it's flat, because they'll need extra attention.
I seal everything with Dullcoat to keep it from shedding, holding the can about 8"-10" away from the object being sealed. If you're going to seal it, do it
before you use anything like Triple Thick Gloss, otherwise you'll dull the glossy bits and need to reapply the gloss. Once you've sealed, let it dry and then brush everything off with a fluffy brush to get any extra fibers off of things. You'll be finding flocking everywhere for a while, it's amazingly awful to try and clean up. This is the point where you can gloss anything that needs it, just make sure that there's no stray fibers on the surface of whatever you're glossing, otherwise you'll seal that stuff in.
And now, the projects! First up, Tibbers! He was a 7" vinyl Munny that I got as part of a trade for a custom.
visitors can't see pics , please
register or
loginThe flocking makes an awesome contrast to the sculpted bits and the flat painted areas, like his tummy and mouth.
I also made a Big Brother Chewbacca.
visitors can't see pics , please
register or
loginHe actually uses two shades of flocking, neither of which really matched the paint that I used on him, which resulted in him having a bit more accurate coat. Again, there's a nice contrast between the fur and the non-flocked parts like his eyes and his sculpted bandoleer. I flocked him before I rehaired him, since I didn't enjoy the thought of trying to get flocking out of his mane and tail. Since I only did one layer of flocking over the plug holes, it wasn't difficult to root the mane at all.
Both Tibbers and Chewy were sealed with Dullcote after I flocked them. It will keep them from shedding, but the trade off is that they don't feel fuzzy like So Soft ponies, but definitely don't feel like I sculpted their fur with a texturizing paint.
However, Cookie was left unsealed to keep him soft.
visitors can't see pics , please
register or
loginSince he's not a huge piece (he's actually only about the size of my whole thumb) that would be handled much, I left Cookie all soft and fuzzy.
Any other questions?