16
Pony Corral / DIY Foam Board Pony Risers Tutorial
« on: November 23, 2012, 07:25:40 AM »
Copying this over from the old Arena
A few years ago I decided I needed a way to display my ponies so I could actually see them all. I was tired of messing with dozens of boxes as makeshift risers and I couldn't afford nice acrylic risers so I decided to make my own.
Here's how I did it...
Materials
Two sheets of 20"x30"x3/16" foam board
Utility knife
Hot glue gun with several glue sticks
Yard stick, T-square or some other kind of straight edge
Pen
About 1/2 Yard of felt (optional)
First you need to cut out your side and middle pieces. I made a stencil so I can just trace around it instead of measuring it out every time. You could use the back side of a cereal box, store bought pizza box or something similar to make your stencil should you want one. The measurements will depend on the space where you display your ponies but I'll include the measurements I use for my risers in just a bit to give you an idea of the proportions
visitors can't see pics , please register or login
Here I've traced all 3 of my "step" pieces onto the foam board
visitors can't see pics , please register or login
Here I've got my ruler to use as a straight edge while I cut to make sure I don't wander off the line. Be careful not to cut yourself!
visitors can't see pics , please register or login
You should have 3 identical step pieces
visitors can't see pics , please register or login
This shot shows the measurements I used to fit my shelving system
visitors can't see pics , please register or login
Take your second sheet of foam board and cut out a strip the same width as your lower step where the ponies will stand. If you have a large T-square now is the perfect time to use it to make sure everything stays as even as possible
visitors can't see pics , please register or login
Run a generous bead of hot glue along the top edge of the lower step and place your strip on the edge. Watch out for the hot glue because it will squish out of the edges when you press it into place
visitors can't see pics , please register or login
Repeat that step with the other end piece, then the middle and you should have something like this
visitors can't see pics , please register or login
Cut another strip and do the same thing with the upper step and your risers should look like this
visitors can't see pics , please register or login
Cut a third strip to close the gap between the two steps and glue it into place along the front edges of the 3 step pieces.
visitors can't see pics , please register or login
At this point I flip my risers over and apply a bead of hot glue along the seams to ensure a strong build
visitors can't see pics , please register or login
Flip them back over and cut the fourth strip to close the last gap on the front of your risers. Now is a good time to look your risers over and glue up any weak spots. At this point you can call it done or you can pretty it up a little bit
visitors can't see pics , please register or login
I chose to cover mine in green felt to look like grass. You could also try other materials, just make sure it's safe for ponies to stand on. You wouldn't want to make lovely new risers for your ponies and find out later that all your ponies are stained. I find that the felt does a decent job of hiding the hot glue blobs and my ponies have been on these risers for years with no ill effects. In this shot I have my risers on their back and I'm starting to glue the felt into place on the lower edge. I'm keeping the selvedge edge of my felt lined up with the left edge of my risers to keep everything nice and even. Glue the felt into place on the front of the lower step in this pattern I___________I It's not necessary to glue the upper edge.
visitors can't see pics , please register or login
To make it easier to handle you can snip away the excess felt on the right side of the first step
visitors can't see pics , please register or login
Work the felt over the step and make sure it's relatively even and smooth and glue it into place in the same pattern I_____________I Keep smoothing and gluing until you get to the back edge. Now snip off all the excess felt
visitors can't see pics , please register or login
Glue into place along the sides and the back edge
visitors can't see pics , please register or login
Now you only have the sides left to deal with. If the risers will be in a bookcase there's no need to felt the sides as they won't be seen. For my shelves, I have two risers side by side so I only need to felt one end on this set.
visitors can't see pics , please register or login
If you have scrap pieces this is a good place to use it. Just glue along all the edges and snip them off even
visitors can't see pics , please register or login
Here's my completed riser
visitors can't see pics , please register or login
Now for the fun part! Here's my shelf, packed full of ponies but I'm only able to see the ones on the front row. Ho-hum.
visitors can't see pics , please register or login
Now here's the same shelf with the riser in use! Way better, no?
visitors can't see pics , please register or login
My risers were cut to accommodate mostly G1 and G3 ponies so if you're only displaying G4s or babies you could work in an extra level on your risers and have even more room. It all depends on what you're displaying and where you're displaying it. Make a few test "step" patterns on regular paper and hold them up to the spot you intend to put them to make sure of the fit. Also hold ponies up to them to make sure the steps are the right height for the look you want to achieve.
Please post your results in this thread if you make these risers, I'd love to see what you come up with!
A few years ago I decided I needed a way to display my ponies so I could actually see them all. I was tired of messing with dozens of boxes as makeshift risers and I couldn't afford nice acrylic risers so I decided to make my own.
Here's how I did it...
Materials
Two sheets of 20"x30"x3/16" foam board
Utility knife
Hot glue gun with several glue sticks
Yard stick, T-square or some other kind of straight edge
Pen
About 1/2 Yard of felt (optional)
First you need to cut out your side and middle pieces. I made a stencil so I can just trace around it instead of measuring it out every time. You could use the back side of a cereal box, store bought pizza box or something similar to make your stencil should you want one. The measurements will depend on the space where you display your ponies but I'll include the measurements I use for my risers in just a bit to give you an idea of the proportions
visitors can't see pics , please register or login
Here I've traced all 3 of my "step" pieces onto the foam board
visitors can't see pics , please register or login
Here I've got my ruler to use as a straight edge while I cut to make sure I don't wander off the line. Be careful not to cut yourself!
visitors can't see pics , please register or login
You should have 3 identical step pieces
visitors can't see pics , please register or login
This shot shows the measurements I used to fit my shelving system
visitors can't see pics , please register or login
Take your second sheet of foam board and cut out a strip the same width as your lower step where the ponies will stand. If you have a large T-square now is the perfect time to use it to make sure everything stays as even as possible
visitors can't see pics , please register or login
Run a generous bead of hot glue along the top edge of the lower step and place your strip on the edge. Watch out for the hot glue because it will squish out of the edges when you press it into place
visitors can't see pics , please register or login
Repeat that step with the other end piece, then the middle and you should have something like this
visitors can't see pics , please register or login
Cut another strip and do the same thing with the upper step and your risers should look like this
visitors can't see pics , please register or login
Cut a third strip to close the gap between the two steps and glue it into place along the front edges of the 3 step pieces.
visitors can't see pics , please register or login
At this point I flip my risers over and apply a bead of hot glue along the seams to ensure a strong build
visitors can't see pics , please register or login
Flip them back over and cut the fourth strip to close the last gap on the front of your risers. Now is a good time to look your risers over and glue up any weak spots. At this point you can call it done or you can pretty it up a little bit
visitors can't see pics , please register or login
I chose to cover mine in green felt to look like grass. You could also try other materials, just make sure it's safe for ponies to stand on. You wouldn't want to make lovely new risers for your ponies and find out later that all your ponies are stained. I find that the felt does a decent job of hiding the hot glue blobs and my ponies have been on these risers for years with no ill effects. In this shot I have my risers on their back and I'm starting to glue the felt into place on the lower edge. I'm keeping the selvedge edge of my felt lined up with the left edge of my risers to keep everything nice and even. Glue the felt into place on the front of the lower step in this pattern I___________I It's not necessary to glue the upper edge.
visitors can't see pics , please register or login
To make it easier to handle you can snip away the excess felt on the right side of the first step
visitors can't see pics , please register or login
Work the felt over the step and make sure it's relatively even and smooth and glue it into place in the same pattern I_____________I Keep smoothing and gluing until you get to the back edge. Now snip off all the excess felt
visitors can't see pics , please register or login
Glue into place along the sides and the back edge
visitors can't see pics , please register or login
Now you only have the sides left to deal with. If the risers will be in a bookcase there's no need to felt the sides as they won't be seen. For my shelves, I have two risers side by side so I only need to felt one end on this set.
visitors can't see pics , please register or login
If you have scrap pieces this is a good place to use it. Just glue along all the edges and snip them off even
visitors can't see pics , please register or login
Here's my completed riser
visitors can't see pics , please register or login
Now for the fun part! Here's my shelf, packed full of ponies but I'm only able to see the ones on the front row. Ho-hum.
visitors can't see pics , please register or login
Now here's the same shelf with the riser in use! Way better, no?
visitors can't see pics , please register or login
My risers were cut to accommodate mostly G1 and G3 ponies so if you're only displaying G4s or babies you could work in an extra level on your risers and have even more room. It all depends on what you're displaying and where you're displaying it. Make a few test "step" patterns on regular paper and hold them up to the spot you intend to put them to make sure of the fit. Also hold ponies up to them to make sure the steps are the right height for the look you want to achieve.
Please post your results in this thread if you make these risers, I'd love to see what you come up with!