The MLP Arena

Creativity => Customs => Topic started by: SparkleSkye on July 26, 2018, 07:49:01 AM

Title: "ALL ABOUT" Symbol Removal
Post by: SparkleSkye on July 26, 2018, 07:49:01 AM
Acetone does nothing to the 'all about's ds murals. I can remove the eyes and the nds cutie mark with no problem, but the murals resist my attempts. Does anyone know how to remove that?
Title: Re: "ALL ABOUT" Symbol Removal
Post by: RoseNoire on July 26, 2018, 07:59:14 AM
There was a thread about it a while before. I think they managed to remove it using stronger acetone or acetone-free nail polish remover. Note that I think it leaves a big white spot where the picture is supposed to be.
Title: Re: "ALL ABOUT" Symbol Removal
Post by: Safflower on July 26, 2018, 08:08:03 AM
Yes, there was a thread about removing all about symbols some time ago. The paint is different and thicker, so you have to soak the side in acetone IIRK? It messes up the texture of the plastic and you can't get it all off though...
Title: Re: "ALL ABOUT" Symbol Removal
Post by: MidnightRarity on July 26, 2018, 09:07:52 AM
I’ve had to scratch the paint off with my nails..

It’s not the BEST method, but the only one that works  :huh:

Good luck!  :lol:
Title: Re: "ALL ABOUT" Symbol Removal
Post by: Sweet Daes on July 26, 2018, 09:34:11 AM
Acetone does nothing to the 'all about's ds murals. I can remove the eyes and the nds cutie mark with no problem, but the murals resist my attempts. Does anyone know how to remove that?

This is the thread that they are talking about  :3
http://mlparena.com/index.php?topic=390709.0

Basically, to make the mural on the side they didn't use the same ink/paint as the cutiemark. It's painted over top of a white coat on the side of the pony that has been roughed up a bit for better adhesion.



Oh, and I forgot to mention:
Because of the chemicals/scraping that goes into removing the paint you are likely going to cause some surface damage to the vinyl underneath. I have yet to run into a G4 (or G4.5) that can withstand that kind of abuse, and it starts to break down the plastic where it leaves behind scrapes and rubs. That's part of why when it finally comes off it leaves the side looking matte.



Edit #3:
https://i.imgur.com/npju6Di.jpg?1
I tried it with Soarin with pure acetone, and it's not going well. The photo doesn't show it, but scraping it marred the surface of the vinyl- it looks terrible and painting it will not cover the flaw.

Acetone on G4.5 ponies has a worse result than G4 with the surface looking like it's starting to dissolve so I can't recommend any sort of long-term acetone soak on the All-About series.



Edit #4:
https://i.imgur.com/6Onj2LW.jpg
welp... You can have better luck preserving the body of the pony by soaking a cotton pad, hold it to the paint for a couple minutes, then let it dry a smidge. you should be able to scrape the paint off, almost like wipe it off with a course, dry cloth or paper towel with minimal force.

It's going to take patience- that small area took me about 20 minutes, and most of it has been trying to get the paint in around the hoof off and horsefeathers off. You can see the gloss of the body on that front leg versus the matte of the rear leg where I used my typical stripping technique. There is also now a gouge in that rear leg because of the scraping so it can't be stripped like previous generations of ponies.
SimplePortal 2.3.5 © 2008-2012, SimplePortal