The MLP Arena
Pony Talk => Pony Corral => Topic started by: Mlp Sunsparkle on August 20, 2020, 10:52:29 AM
-
Hey everyone!
So I have a bit of an ongoing de rusting marathon that’s been happening over the past month, trying to get it out of at least the g3s with turning heads. I’ve done quite well, with only about 5 still rusty (heads are on tight! And there’s no way I’m going near them or myself with anything sharp, I am too clumsy).
So in the second batch of rustybutts I opened up pretty parasol. As I looked inside I was greeted with some orange - brown spikes! I thought the “spikes” were just rust chunks on her tail, but it turns out she’s put together rather oddly!
The tail is the exact thickness of all my other pretty parasols, and all the g3s I was de rusting, but it is not folded over and secured. It’s held together with a regular clip, again nothing off, until you see the metal bar that is fused onto the clip and the Pac-Man looking washer. It’s a solid unit, there is no way it’s coming off! The tail is an exact match with tinsel and is just as beaten up as she is!
Pics below :)
Full tail
visitors can't see pics , please register or login
Metal bar
visitors can't see pics , please register or login
Extra metal bar
visitors can't see pics , please register or login
Close up
visitors can't see pics , please register or login
Fused
visitors can't see pics , please register or login
Just thought I’d share yet more random odd g3 stuff, thanks to hasbro’s quality control
Sunsparkle x
-
oh yeah these :(
-
oh yeah these :(
Getting it back in is going to be really fun :| plus It’s only going to continue as I can’t get the washer off! It’s a shame, not quite sure where they were going with this style!
-
Take a pair of needle-nose pliers and just twist at the ring and bar until either they break apart or you can wiggle the tail out. Try to get the tip of the pliers inside the bar if you can, and loosen its hold. That’s how I handled my rusty G3s, and it worked out. :) The metal is fragile, so enough stress will snap even this mutant washer in half. Tail rust is such a pain. :cry:
(On a fun and cautionary side note, I once had to go to the ER after stabbing myself with a screwdriver trying to open up a glued pony head.)
-
Take a pair of needle-nose pliers and just twist at the ring and bar until either they break apart or you can wiggle the tail out. Try to get the tip of the pliers inside the bar if you can, and loosen its hold. That’s how I handled my rusty G3s, and it worked out. :) The metal is fragile, so enough stress will snap even this mutant washer in half. Tail rust is such a pain. :cry:
(On a fun and cautionary side note, I once had to go to the ER after stabbing myself with a screwdriver trying to open up a glued pony head.)
I have cut myself so many times removing glued heads...